Thickness Haum Lub Tsheb Hloov Pauv Lub Hlwb Yeeb Nkab -- lub tswv yim ntawm valve sib tshooj

It is very important to introduce a concept of "valve overlap" here! It must be designed to ensure sufficient air intake, otherwise the engine air intake will be insufficient, the combustion efficiency will be low, and the torque will be low. This valve overlap means that at the last step of a cycle, when the process of exhausting exhaust gas has not been completed, that is to say, when the piston has not moved up to the top dead center (that is, the uppermost end) in the exhaust process, the intake air The door has opened. This is the first time for the intake valve to open early, and the first time for the cylinder to start inhaling after reaching the top dead center instantaneously, to ensure that the intake valve is already open and in a standby state. The intake valve opens early, and the exhaust valve is in the open state, which is called valve overlap.

Shenzhen Pride Industrial Co. Ltd yog ISO9001 certified cnc machining tsum. Peb muaj lub koob npe nrov rau kev zoo siab rau cov neeg siv khoom nrog peb lub siab ceev, kev pabcuam zoo rau cov neeg siv khoom thiab kev sib txuas lus zoo.

Cov neeg tsim khoom lag luam Thickness haum lub tsheb hloov kho lub luj tshib yeeb nkab

Thov hu rau peb ntawm zhang@pride-cnc.com